| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Lubrication | Rate Topic |
| Author | Post |
|---|
| Posted: 07-25-2011 01:36 am |
|
1st Post |
|
timeforwalkies Member
|
Since I was unable to find a way to lubricate the door hinges other than removing the doors, I decided to open a new topic on Lubrication. Not that there are other locations that are a puzzle, but just maybe. I can not figure a good way to lubricate the door hinges without making a big mess. Anybody out in JHPS land have a good method for this operation? Or any other places that may need lubricant that are difficult? Last edited on 07-25-2011 01:56 am by timeforwalkies |
||||||||||||||
| |||||||||||||||
| Posted: 07-25-2011 05:59 am |
|
2nd Post |
|
Mason Jones Member 
|
I just found this stuff which could help. It's basic all-purpose grease in a WD-40 style spray bottle. It's supposed to spray out thin and then thicken up. The tube should help direct where the grease goes in hard to get to places. I bought it for the door latches which are hard to get at even with the door panels off. But I haven't had a chance to try it yet because the brakes have trumped any other repairs at the moment. (BTW, I'm not endorsing the brand here just the delivery method!) Attachment: SAM_4555-small.jpg (Downloaded 37 times)
|
|||||||||||||
| ||||||||||||||
| Posted: 07-27-2011 09:22 pm |
|
3rd Post |
|
pbahr Member 
|
Seems that all the new car dealers use lithium grease (pink) for that application. YELODOG
|
||||||||||||||
| |||||||||||||||
| Posted: 07-28-2011 12:44 am |
|
4th Post |
|
Greg Fletcher Administrator 
|
A mechanic friend told me recently that Red Line Synthetic CV-2 Grease is the thing these days. Will not dry out over long periods like the white stuff.
|
|||||||||||||
| ||||||||||||||
| Posted: 07-28-2011 01:47 am |
|
5th Post |
|
timeforwalkies Member
|
Thanks guys, but what to use isn't the problem. It's how do you get it into the hinge? I just tried using a piece of 1/8 inch tubing. About a foot long, and put a few drops into the tubing. Then located the end at the hinge pivot. Blew into the tube which spray the oil. But I don't think much went into the hinge since the door still squeaks. Any other ideas. Thanks again, Clif
|
||||||||||||||
| |||||||||||||||
| Posted: 07-28-2011 04:17 am |
|
6th Post |
|
pbahr Member
|
I love solid lubricants like graphite and MoS2. Grainger makes a spray can with MoS2 in an evaporating carrier. The spray penetrates very small spaces and carries the MoS2 with it. The volitile carrier soon evaporates, leaving a coating of the solid lubricant. Grainger: #2F138 Dry Moly Lube, 16 oz, Net 11 oz about $12. Worth a try, for sure. YELODOG
|
|||||||||||||
| ||||||||||||||
| Current time is 02:16 am | |
| > Jensen Healey & Jensen GT Tech > Miscellaneous > Lubrication | Top |
