View single post by cavanbound

Posted: 09-07-2010 01:15 am

Quote

Full Topic

cavanbound

Joined:	08-18-2010
Location:	St. Cloud, MN, USA
Posts:	12
Status:	Offline

Brett - thanks much. I pulled the dizzy cap, it was well over 90 but probably not as much as 180 degrees out of alignment with cylinder 1 - likely, I did as I suspected and simply didn't take enough care to keep that shaft from rotating as I worked.

18082 fired nicely, and will be back in service as soon as I get the radiator re-installed (um, for the 2nd time).

Thanks again - Matt