View single post by Greg Fletcher
 Posted: 06-15-2010 11:27 pm
PM Quote Reply Full Topic
Greg Fletcher



Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 430
Status: 
Offline
 Lash is right. The rotors are very thin to start with, it's not recommended by the manufacturer to turn them. However, like many thrifty JH owners, I too have also had a local machine shop turn a set for me some years ago, only taking off a small amount. Keep in mind that some shops these days will not want to do it since they don't know what the "factory minimum thickness" is. I've never seen that myself, not sure if it exists. You'll need to find a shop that will work with you.