jarnol123
|
New to the forum. I have a 1975 Jensen Healey that was running then one day as I was driving dow the road it started spluttering as if it was out of gas but it wasn't. Upon inspection I established that gas was getting to the carbs and I installed a new pertronix coil and hooked everything up correctly.
I noticed that I was getting only 6 volts to the coil before and during cranking. I ran a wire to the coil directly from the battery to ensure I got 12 volts. Now, I turn on the ignition and there is nothing - the battery is fully charged. I checked the 3 fuses and they look fine. Anyone have any ideas what could be the issue here?
|