View single post by rossjfox

Posted: 04-28-2009 07:15 pm

Quote

Full Topic

rossjfox

Joined:	05-19-2008
Location:	Montville, New Jersey USA
Posts:	56
Status:	Offline

Thanks! This is an interesting theory, especially because I had some idea there might be a servo vacuum leak. So much so, that I recently tried to evaluate the servo with my vaucum gauge as decribed by Buckeye Triumph here: http://www.buckeyetriumphs.org/technical/Brakes/Servo/Servo.htm.

What I found was that the servo seemed to hold vacuum ok, by the non-return valve was faulty.

Would a bad non-return valve produce the type of vacuum leak of which you speak? Or should i suspect a leak elsewhere in the servo that i failed to detect?

Ross

Last edited on 04-28-2009 07:16 pm by rossjfox