View single post by pbahr
 Posted: 02-09-2009 08:13 pm
PM Quote Reply Full Topic
pbahr



Joined: 04-15-2005
Location: Phoenixville, Pennsylvania USA
Posts: 202
Status: 
Offline
 Dale,

You could give them a phone call and perhaps they can identify the correct screw from the car make/model.

Or, pull one from the TR-7 and compare to the JH - it might be the same.

Or, get out your calipers/micrometer and measure the diameter and count threads per inch.

The size code is:  3824 = 3/8 inch diameter, and 24 tpi.

Pete