View single post by Harkes | |||||||||||||
Posted: 09-24-2007 07:48 am |
|
||||||||||||
Harkes
|
I have them as well. Bear in mind if you are running on the stock 13" wheels you need the 30mm adapters to clear the inside of the front wheels. Since your front wheels will then be pushed out further then your rears...you might want to put 30mm adapters/spacers there too (which I did). Performance is great! i do not use the stock rotor, but the performance rotors Delta sells (with the holes, to reduce fade). The other noticeable difference is: JH BIG BRAKES weigh less then 30% compared to the stock ones! It is truly a performance upgrade and a must if you have a 2.2L engine with over 200+ BHP. Small detail: JenSport ...i like it good luck
|
||||||||||||
|