 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 03-17-2005 |
| Location: | Warmond, Netherlands |
| Posts: | 216 |
| Status: |
Offline
|
my hose goes from the fitting at the rear of the head directly to "interior heater INLET". There is NO hose running from the inlet manifold to the interior heater inlet. My inlet manifold is plugged at the end where in stock set-up the hose is supposed to go.
Below the interior heater inlet is the interior heater outlet. I run the stock hose from the heater outlet towards the waterpump.
I have seen photo's of JH owners who have connected the hose from the head (cyl 4) into the stock hose that goes from inlet manifold to interior heater inlet. I understood they used a T-piece with a one way valve. This set-up wasn't recommended by Gary Kemp.
I will soon make pictures for you as promised.
cheers
erik