View single post by Scott Robinson
 Posted: 04-14-2005 08:39 pm
PM Quote Reply Full Topic
Scott Robinson

 

Joined: 03-22-2005
Location: Libertyville, Illinois USA
Posts: 30
Status: 
Offline
 I have seen many references over the years to the looonnnggg pedal throw, but I don't recall any mention of the 4-speed clutch action being particularly stiff (difficult to depress the pedal).  If everything is moving freely you should only be pushing against the pressure plate springs. Maybe things just need to break in a bit. Unless you installed a particularly heavy duty pressure plate, I would investigate further. Suggest you disconnect the cable from the throw out bearing actuating arm and make sure the inner cable is moving without resistance when the pedal is depressed. One posssiblity is a broken strand in the cable inside the sheath.

Good luck and congrats on getting it back to mobile.

Scott