John Finch
| Joined: | 08-01-2005 |
| Location: | Minneapolis MN |
| Posts: | 122 |
| Status: |
Offline
|
|
I just changed oil on 18309. The front end was up on jack stands to r&r the radiator for repair so while I was there...Likely got most of the pan oil out. Didn't do the filter or cooler as the oil only had about 1500 miles on it but did have fogging oil in it from the initial start last fall and then occasional winter shots for th epast 5 months. Plus psi at idle had dropped to about 30-35 at full temp so I thought some new 20/50 might help. Psi is back to about 40 at idle and full temp. Added 5 qts to the top of the fill line but am getting some smoke so next time will try 4.5 qts.
|
