View single post by Mark Rosenbaum
 Posted: 05-07-2006 05:12 pm
PM Quote Reply Full Topic
Mark Rosenbaum



Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 The exhaust is a tight fit in some places, and conceivably there might be a problem if your transmission mount, engine mounts, or engine damper are worn out and allow too much movement of the engine.  But if your worst case clearance is, say, a half inch, you should be all right.

If you find that you need to change your engine or transmission mounts, check afterwards to ensure that the steering shaft U-joints don't interfere with your exhaust header.