View single post by Mark Rosenbaum
 Posted: 05-01-2006 08:27 pm
PM Quote Reply Full Topic
Mark Rosenbaum



Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 Try holding the nut in place with the shaft of a screwdriver or something similar.  It might be necessary to drill a hole into the floor bracket to do this.  If that doesn't work, you can try pulling off the C-clips holding the seat bottom cushion in place, removing the cushion, and working from above.  And if that doesn't work, you may need to use the torch.