View single post by Jensen Healey
 Posted: 04-23-2006 01:13 am
PM Quote Reply Full Topic
Jensen Healey



Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
 I made a shadetree fiberglass box on a aluminum mounting plate so the velocity stacks would fit inside. The stock cover was used with a hose to a cone filter near the front. A three inch hole is drilled in the bulkhead above the overflow bottle.

http://jhppg.com/gallery/album37/JH_Big_Engine

I have since added a shield so it doesn't suck radiator air.