View single post by Jensen Healey
 Posted: 03-30-2006 02:51 pm
PM Quote Reply Full Topic
Jensen Healey



Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
 I have never replaced those bushings for obvious reasons. It seems pretty clear that you need to jack or block the engine and un-bolt the motor mounts. Then remove the two bolts at the rear of the subframe and the nuts from the top mounts and drop the entire subframe.

Let us know how it goes.

Kurt

JH 13148