View single post by Mark Rosenbaum
 Posted: 03-08-2006 09:37 pm
PM Quote Reply Full Topic
Mark Rosenbaum



Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 IIRC the screws holding the stainless pieces at the bottom and rear of the door openings were originally chromed steel #4 self-tapping sheet metal screws with Pozidrive heads.  Many owners have replaced them with stainless Phillips head screws.  Delta may have some but they don't appear in my copy of their catalog.

If you're asking about the screws holding the stainless pieces at the bottom of the door opening, my car has 6 per side as per the photo below.  There shouldn't be anything else holding the things in place.

 

Attachment: trim screws.jpg (Downloaded 47 times)