View single post by Arvin Appelman
 Posted: 02-16-2006 03:58 am
PM Quote Reply Full Topic
Arvin Appelman

 

Joined: 03-14-2005
Location: Columbia, Tennessee USA
Posts: 50
Status: 
Offline
 The metal plates were glued to the foam in the dash and are used to hold the dash panel in place.  The foam deteriates and the plates rust.  I don't know of any way to reinstall the plates into the dash.  I used 1/4 plywood in place fo the plates.  I had to cut the foam to countersink the wood.  I installed them with silicon glue and small screws angled into the foam.  When reinstalling the dash panel don't over tighten these screws.

Arvin Appelman

19492