View single post by Jay T
 Posted: 02-07-2006 05:15 am
PM Quote Reply Full Topic
Jay T

 

Joined: 
Location:  
Posts: 
Status: 
Offline
 Thank you Edward for that worthwhile information.  I may just go ahead and try to remove the instrument cluster.  I've already got the steering wheel off, the lower switch panel, turnsignal switch cluster and center console out.

However, I have solved my gas guage and tach problems.  In both cases, the problem was bad connections.  With the gas guage, it was the 5-way connector (black) below/near the steering column.  I just had to pull it apart and re-connect it firmly.  The green wire in the "#1" position (according to schematics) was the bad connection. 

In the case of the tach, it was the white wire connection on the tach itself.  It took a little extra force to get it seated properly.