View single post by redracer
 Posted: 08-11-2024 08:32 pm
PM Quote Reply Full Topic
redracer

 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 652
Status: 
Offline
 That lower "Y" pipe was not supposed to be welded-- looks like a poor weld at best
I would cut down the center of that lower "Y" pipe to separate the 2 halves, remove, then grind down the welds to save the headers. I have plenty of "Y" pipes to replace that part, but it SHOULD BE CLAMPED, NOT WELDED