View single post by redracer
 Posted: 04-08-2024 10:34 pm
PM Quote Reply Full Topic
redracer

 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 652
Status: 
Offline
 I can't be sure from the 2 dimensional picture, but that looks like the earlier('72 & '73) flywheel. If that surface is "sticking out" (i.e. to the front of the car), that will most definitely hit the seal cover.
Better pix of that same are where the crank-to-flywheel holes are showing that "rubbing" surface would let me know definitely if you have the wrong flywheel in there.
I recycled all the early ones I had as the later ones are fine and a little lighter. If you need one, I have plenty of good used ones