 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 09-16-2016 |
| Location: | |
| Posts: | 71 |
| Status: |
Offline
|
Will see how it works out this month.
| View single post by jomac | |||||||||||||
| Posted: 12-16-2022 01:25 am |
|
||||||||||||
jomac
|
Correction the fuse box I got from martinrobey.com is a 3 fuse and same as the original with slight changes. I plan cutting the bottom wiring harness that goes thru the grommet and adding A multiple pin connector before the fusebox allows for service later. The 3 fuse wiring I will transfer the current wires to the new terminals. If wires are short I'll splice in a connector. Looking at the wiring diagram there shouldn't more the 5 wires to deal with. So I would have 2 connectors behind the fusebox . When servicing the fusebox if needed you can remove it , slide it along the grommet wiring cable far enough to disconnect the connectors behind the fusebox. Will see how it works out this month.
|
||||||||||||
|
| |||||||||||||