View single post by chuckcm14
 Posted: 05-30-2021 06:17 pm
PM Quote Reply Full Topic
chuckcm14

 

Joined: 11-14-2019
Location: Lawsonville, North Carolina USA
Posts: 16
Status: 
Offline
 1. Does the oil sump need to be removed to replace the rear oil seal?
2. If careful installing the rear housing with the seal is it necessary to use the special installation tool. I had good luck stalling the front seal by removing the adjuster stud and slight rotating the cover as the cover was installed.
3. What bolts in the rear housing/flywheel need to have thread sealant applied.
4. What is best sealant for rear seal housing gasket.

No known problems with the clutch and related parts at this time, However I do not know the condition. I have new parts pressure plate, clutch, throughout bearing, pilot bearing etc. At this time I am hoping the flywheel is ok.