View single post by mgreaves
 Posted: 04-30-2021 04:47 am
PM Quote Reply Full Topic
mgreaves

 

Joined: 02-05-2013
Location:  
Posts: 26
Status: 
Offline
 Brendan, I'm not sure exactly what hardware you need, I'm in Australia, some of the hardware used on the J-H is common to the Holden Torana, some other bits you will probably have to modify yourself from standard.
The bolts in the SS door trim are easily replaced with normal bolts by grinding the heads down, and into a "t" shape so they dont rotate in the grove at the back of trim.
As far as the basic nuts and bolts you should be able to get them pretty much anywhere, there is a mix of Metric and some strange IF on the car (for example the nuts holding the tail lights on are not Metric and not imperial) Although the GM Torana ail light nuts work.
I will qualify all that I have said with the over rider that as mg JH (55032) is the pre production prototype so some things changed once the car made it to production and so my experience may be irrelevant.