View single post by Jagwire64
 Posted: 11-23-2020 07:19 pm
PM Quote Reply Full Topic
Jagwire64

 

Joined: 07-21-2020
Location: Chesterfield, Virginia USA
Posts: 42
Status: 
Offline
 It is igniter 2...with the resistor i have 3 ohms. Never had it die at idle. it was only starting the moment i let go of the key when warm. No sound but the starter and when i let go it would catch (if it started at all)

Did finally get the oil vent/catch can and evap can all plumbed and installed. Problem appears to have been solved.

Got it up to temp...waited 30 min and it started with no trouble...didn't touch the accelerator or choke. drove it a bit and tried again at 5 and 10 min after shut off. starts like magic now. I can hear it firing before i let off the starter.

Too soon to know for certain but the outlook is good. Will check the pertronix if the trouble returns.

Thanks for all the help.