View single post by Jagwire64
 Posted: 08-14-2020 05:56 pm
PM Quote Reply Full Topic
Jagwire64

 

Joined: 07-21-2020
Location: Chesterfield, Virginia USA
Posts: 42
Status: 
Offline
 There is a 10, 15 and 7 mark on the inside circumference/bore of the pulley with the 7 opposite side of 10 and 15. I'm guessing if i removed the bolt I would see the 2 different keys you suggest. I don't see a 2 anywhere.

I read your suggestion of changing to 110 in another post and probably try that when I replace the belt. I don't think the belt is more than a year old and looks to be in good shape. PO had it set to 70 lb tension which I fixed to 95 following your advice. I will probably change the belt this winter just to be safe.

Thanks