View single post by Jagwire64
 Posted: 07-29-2020 02:49 am
PM Quote Reply Full Topic
Jagwire64

 

Joined: 07-21-2020
Location: Chesterfield, Virginia USA
Posts: 42
Status: 
Offline
 I took the cylinder apart and cleaned it and lubed it. I didn't fool with the pins though. It appears to be working...if the pins allow it to go clockwise with a key, I don't know why it wouldn't go they other way as well. Unless it's not supposed to.

One cylinder locks and unlocks, I put it on the drivers side. The other cylinder only turns a 1/4 turn clockwise. Which, is locking the passenger door. The key won't turn the other way, so it won't unlock the door.

Should I be able to unlock the passanger door with the key as well? My reading of the owners manual suggested the passenger door key only turned one way. It only unlocked the door?

The cylinder appears to be functioning..maybe I should take it to a locksmith. Especially if both doors should lock and unlock with the key?

Last edited on 07-29-2020 03:08 am by Jagwire64