View single post by Tom Bradley
 Posted: 02-13-2020 03:59 am
PM Quote Reply Full Topic
Tom Bradley

 

Joined: 07-15-2013
Location:  
Posts: 203
Status: 
Offline
 Replacements for the internal distributor seal has come up numerous times on this forum. Here is the link to one of them:
http://www.jensenhealey.com/forums/view_topic.php?id=2134&forum_id=5
(look at post #2)

I used the recommended one from Mcmaster Carr a couple of years ago and have had no problems so far. I had to press the steel bearing down a bit to install it in the opening but did not have any problems with that. Getting the distributor apart to see how the shaft was designed was much harder.