 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 02-05-2013 |
| Location: | |
| Posts: | 26 |
| Status: |
Offline
|
To mount the oil pump I made a bracket out of 3mm Mild steel and bolted it using existing bolt holes where the radiator mounts and onto a small racket that wasn't holding anything. (I have 1110- 55032 which is a pre-production prototype) so I didn't want to be altering the chassis in any way, lest I ruin something that cant be replaced.
The bracket took a while to get right but fits in the odd angle area on the RHS of the radiator. This is where i"ve mounted CB's. relays for the pump and electric radiator and electric thermostat for the electric fan.
I'll have to pull it off again when I get the correct paint and the wiring will need a tidy before I start getting Oil hoses cut and installed.
Cheers
Michael
Attachment: Electric Oil Pump JH.jpg (Downloaded 74 times)
Last edited on 07-31-2019 08:37 am by mgreaves