View single post by johnfalveyross
 Posted: 03-24-2018 10:31 pm
PM Quote Reply Full Topic
johnfalveyross

 

Joined: 08-21-2015
Location:  
Posts: 8
Status: 
Offline
 I took some ohmmeter readings and came up with the following:
New Bosch coil with internal Ballast - 3.5 ohm

Original Remy Delco coil - 2.0 ohm
Original Ballast resistor - 2.2 ohm
Total - 4.2 ohm
When the new coil was first installed I was not aware of the internal ballast so the external ballast resister was installed as well. If I am understanding this correctly that would have made the total resistance at that time 5.7 ohm.