 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 05-01-2005 |
| Location: | Minneapolis, Minnesota USA |
| Posts: | 575 |
| Status: |
Offline
|
I've got 4 new ones, measured them with a micrometer, and got an average of 0.0925" (2.35mm)
Lotus = Standard, +0.0025, +0.0050, +0.0075, +0.0100
JAE stocks = Std, +0.0025, +0.0050
DBE stocks = Std, +0.0025, +0.0050, +0.0075, +0.0100, +0.015 (DBE special)
Standard = 0.0925" (2.3495 mm) Measured Thickness
+0.0025" = 0.0950" (2.4130 mm) Calc'd Thickness
+0.0050" = 0.0975" (2.4765 mm) Calc'd Thickness
+0.0075" = 0.0998" (2.5349 mm) Measured Thickness
+0.0100" = 0.1025" (2.6035 mm) Calc'd Thickness
+0.0150" = 0.1075" (2.7305 mm) Calc'd Thickness
Regards,
Tim Engel
Last edited on 11-17-2015 05:19 am by Esprit2