Frank Schwartz
| Joined: | 02-18-2011 |
| Location: | |
| Posts: | 313 |
| Status: |
Offline
|
|
The problem could be a plug wire not plugged into the distributor cap..it is so tight under there that when you try to put the cap back on the distributor it is easy to pull a wire from the cap...personal experience...also you can check the firing with a strobe light..just connect the pickup from plug wire 1 on through four..each time just pulling the trigger on the strobe light..If it is firing, it will flash at each plug wire..if it doesn't, it is unplugged...
Also if it seem to run and back fires..check to see that you haven't cross mounted 1 and 3...or 2 and 4 wires in the distributor cap...again,personal experience.
|
