 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 03-14-2005 |
| Location: | Chicago, Illinois USA |
| Posts: | 38 |
| Status: |
Offline
|
First drain the tranny using a 26mm box wrench on the plug at the bottom and use the same wrench for the fill plug. Buy some new fibre washers and apply them on the fill and drain plugs. Use 20/50 motor oil and it usually takes about 2 and 1/2 quarts. To fill the trans I use a hand pump , sorta like a hyperdermic needle,with a rubber hose attached to it and get under the car and pump it in. When it starts to drip out of the fill hole you have enough in there. Some people attach the hose into the fill hole and run it in the area near the battery and fill from the top. Either way its a pain but once completed you know its done right. Good luck!
Joseph Mazurk
Chicago, IL