View single post by Jensen Healey
 Posted: 12-20-2013 10:41 pm
PM Quote Reply Full Topic
Jensen Healey



Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
 No, if the pinion or the rack is worn you will need to have it rebuilt.

I tried .003" shims under the cap opposite where the shaft enters but it caused binding.

I have a zerk fitting in that cap and use grease in the rack instead of 90wt since the oil likes to leak into the boots.

Delta should be able to supply a rebuilt unit.

good luck, Kurt