View single post by Jensen Healey
 Posted: 09-27-2013 04:20 pm
PM Quote Reply Full Topic
Jensen Healey



Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
 If you have a 2.2 with HC pistons and 104 cams then you may indeed have success with:

Spec 9

Carb Type ...................... DHLA 45E
Choke .............................. 37 mm
Main Jet .......................... 160
Main Air Corrector Jet ... 230
Main Emulsion Tube ...... 7772-8
Idle Jet ............................. 55 (maybe a little lean, try up to
58)
Idle Jet Holder ................. 7850-9
Float Weight .................... 8.5 gr
Float Setting Height ........ 14.5 - 15.0 mm
Float Needle Valve ......... 170
Pump Jet .......................... 50H
Starter Jet ......................... 95
Starter Emulsion Tube ..... 7482-3
Power Jet .......................... ---
Slow Running Speed ....... 900 - 1000 rpm
Idle CO Level (hot) ........... 0.7 - 1.5%