View single post by Art DeKneef
 Posted: 08-17-2013 07:39 pm
PM Quote Reply Full Topic
Art DeKneef

 

Joined: 03-12-2005
Location: Mesa, Arizona USA
Posts: 338
Status: 
Offline
 According to the wiring diagram.

There is a white/yellow wire from the starter to the coil. Then from there a white/yellow wire goes to the ballast resistor. On the other side of the ballast resistor is a white wire that goes to the #2 in the engine harness junction 5-way socket. That wire continues to #3 in the Instrument Panel 5-way socket (clear) that then continues to the tach.

Does the tach still work?