 |
PM |  | |
Quote | | |
Reply | | |
Full Topic | |
| Joined: | 03-17-2005 |
| Location: | Placentia, California USA |
| Posts: | 36 |
| Status: |
Offline
|
As you can see in this picture Cross Member I had to mount the crossmember in a new location. Note in the picture the Toyota vibrate mount is bolted to the factory location and it's several inches behind the four original studs still hanging down. I wasn't happy having to drill four holes at the base of the transmission tunnel for the carriage bolts to pass though. And note the mount has a moving plunger that CC's crossmember doesn't accommodate. At least the transmission is setting at the correct operating angle to the motor. I know the alignment is correct is because I'm running a fan shroud around the radiator. The fan blade is perfectly in the center and doesn't rub when running. I remember their instruction as saying "Some fabrication is necessary" They weren't kidding.
Dan Collier
JH74 14381 2.2L
Jensen-Healey Preservation Photo Gallery