| View single post by Paul Koehler | |||||||||||||
| Posted: 07-14-2005 03:04 am |
|
||||||||||||
Paul Koehler
|
Brought the sway bars kits Delta and I'am in the process of installing the front. The length of the arms on my bar is about 13". The problem is that when trying to position the bushing and mount on the frame rail, the end of the bushing holder hangs over the edge of the frame rail(at the junction of where it assends vertically at about 45* angle) making it impossible to have a solid mount. If the leg part of the bar was maybe an inch longer, it would not be a problem. If anyone has one mounted, could you please take a measurement of the leg length. I'm just trying to figure out if I have the correct front sway bar. TIA PK-18849
|
||||||||||||
|
| |||||||||||||
