View single post by Greg_M
 Posted: 02-12-2011 05:51 pm
PM Quote Reply Full Topic
Greg_M

 

Joined: 09-26-2009
Location: Lakewood, Washington USA
Posts: 38
Status: 
Offline
Here is a better picture of the Throttle bodies I machined.  This is still in the mockup stage, throttle shafts and throttle plates have not been installed. Note the Fuel Injectors installed in the factory manifold.  You can see the fuel pressure regulator on the left inner fender (blue unit).  The airbox is from a Lotus Esprit.  Sitting on the airbox is a Cold Idle Valve.  On the back firewall on the right is the Ignition Coils (wasted spark) and in the middle is a Ford Ignition Control unit that matches the Ford Timing sensor.  This unit is controled by the Mega Squirt Fuel Injection Controler.

Attachment: JH Fuel Injection 1.jpg (Downloaded 61 times)